Description
Willy Board – Oz Version 1.5 Add on board for the T-Display S3 – CC1101 SubGhz – IR – TF Card Slot
Willy Board for the LILYGO® T-Display-S3
$39.00
Willy Board – Oz Version 1.5 – Add on board for the T-Display S3 that has an attached CC1101 SubGhz Radio – Infrared Transmitter and Receiver as well as a TF Card Slot (microSD)
Designed to accommodate the Willy Firmware by h-Rat or your own custom Firmware.
IF YOU USE THE WITH WILLY FIRMWARE, YOU MUST HAVE THE CORRRECT FILES ON THE SD CARD THAT WERE SENT WITH THE FIRMWARE! THIS BOARD WILL NOT WORK WITHOUT THE CORRECT FILES ON THE SD CARD. *
** Switch up towards antenna for SubGhz Operations and Down for IR-Receive Operations. IR-TX works regardless.
This is designed to be soldered onto the T-Display S3 module Touch version by LilyGo
SMA connector and 2 x 12 pin socket headers included, You can order them pre-soldered so that you can use the pre-soldered T-Display with this unit without having to solder anything.
Additional information
| Weight | 3 oz |
|---|---|
| Dimensions | 4 × 4 × 2 in |
| Solder On Socket Headers | Solder On Socket Headers to the device so that you can plug the T-Display right into the unit |
| Solder On SMA Connector | Solder On SMA Connector to the device for antenna connection |
